Introduction: Rotating Clock

Picture of Rotating Clock

Combination of different  techniques.
The housing of this clock is made according to the design of mr. Paris.
See the link below to his clock.

https://www.instructables.com/id/The-Sprintronic-Clock-with-Laser-Cut-Case/

The construction of the clockwork is according this instuctable

https://www.instructables.com/id/Time-goes-round-and-round-in-a-bottle/

and the nameplate was made with the technique of this instuctable

https://www.instructables.com/id/How-To-Electro-Etch-a-Solid-Metal-Plaque/

I have made just a few pictures because the construction is not that difficult.
Yhe hand of the seconds has 4 arms, so you can see it more often.
The groove for the window was made with a hole saw. ( see picture )
And the window is made from a plastic jar.
I made a simple battery holder because the battery is difficult to place in the clockwork.






you get a clock like the one in the video.

Comments

amandaghassaei (author)2012-11-26

wow, i like how you pulled together aspects of all these other projects to make this! very unique!

About This Instructable

2,082views

27favorites

License:

More by Alcyon:Rotating clock
Add instructable to: