Instructables

Step 7: Make your Wonder Cover





Select your comicbook page, and cut it so you have an excess of material.

Then, slowly, cut the material down so it fits your particular notebook. 

Next cut your  iron on vinyl to fit the comicbook cut out. 

Iron on the vinyl as per instructions on the box.  

This step was a bit of trail and error for me. I cut it too small a few times

(I learned this process thanks http://www.readymade.com/projects/fold_a_wonder_wallet  , so yes reading that would be a good help.)
 
Remove these adsRemove these ads by Signing Up