Instructables
loading
loading

Step 2: Prepare the tray

Picture of Prepare the tray
IMGP1452.JPG
IMGP1453.JPG
IMGP1454.JPG
IMGP1455.JPG
IMGP1456.JPG
IMGP1457.JPG
We want to cover both of the long sides of the tray with double sided tape.

Put a long strip of tape on the long sides of the tray and cut away exces tape with the exacto knife.
This is the part where you can put blood, sweat and tears into the project. (if you're not careful with the knife)

Don't forget to peel away the layer covering the other sticky side.

Drink from your coffee.
 
Remove these adsRemove these ads by Signing Up