Print PDF
Favorite
Email
Step 7Finishing the rails
Then you just sand down the nose and tail blocks to get a smooth flowing outline, sand down the rail wood to get it all flush to the rest of the deck, then round everything over to get a nice radius on the edge of the board.
Fine sand everything and you're ready to glass.
In the last photo I have taped off the deck of the board in preparation of final glassing. The outside layer of fiberglass will overlap the taped off area, then when it is mostly cured the tape can be lifted and the glass can be cut with a razor right at the tapeline, giving a nice clean border.
Fine sand everything and you're ready to glass.
In the last photo I have taped off the deck of the board in preparation of final glassing. The outside layer of fiberglass will overlap the taped off area, then when it is mostly cured the tape can be lifted and the glass can be cut with a razor right at the tapeline, giving a nice clean border.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
