Print PDF
Favorite
Email
Step 2Cutting the door
For this step I used two templates to make a hole and a door. I cut the hole into the bottom of the barrel and filed off the edges. Make sure you use the bottom of the barrel, as you'll need to make use of the top later.
I found a large piece of scrap plastic to make a door. Again, I traced the template, cut, and filed the edges.
I found a large piece of scrap plastic to make a door. Again, I traced the template, cut, and filed the edges.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
