Print PDF
Favorite
Email
Step 10String the chime
At this point I used a piece of baling wire to create a small hook and fish the clapper rope through the chime.
Just a simple loop in the top to hang it, then I tied the wind catcher to the bottom. Trim the excess rope and use a lighter to melt and clean the ends of the rope.
Just a simple loop in the top to hang it, then I tied the wind catcher to the bottom. Trim the excess rope and use a lighter to melt and clean the ends of the rope.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
