Step 11: Hang it!

All that is left is to find a nice spot in the garden and enjoy it!

Thanks for taking a look guys! Let me know how yours turns out!

Tanks wanted 4014198984
<p>Pure O2 and a match or spark and you'll see fire! Getting it on your clothes for instance and then adding a spark, but doing what you did is good. Also there should be a small regular head screw along the side of the post valve that is the relief valve and you should also unscrew that and take it off. Thanks for the instructable!</p>
<p> Once you get the valve out you can fill the tank with water which displaced any remaining pure oxygen, but, honestly oxygen isn't explosive (like propane) so if you leave it for a couple of hours with the valve off all you have its normal atmosphere in the tank. If you're using propane or acetylene tanks DEFINITELY fillip the tank with water to displace the explosive gases left behind as a precaution. Drain the water out before cutting the tank. </p>
<p>Those chimes are awesome. I have a tank already cut but was wondering if the clapper needed to be a specific size. I have a chain to hang mine with and had not thought about using rope to hang the clapper. I think it would be easier. Does the wind catcher need to be a specific size? Sorry for all the questions.</p>
<p>I just used the rope through and through. The wind catcher and clapper can vary as well. I used a large wind catcher due to the weight of the metal clapper. if you're using a hockey puck or razor scooter wheel you won't need as much wind to push it around. If it's too small or large you can always make a new one. </p>
<p>Smart! I see some cool future uses outta those ends!</p>
<p>Brillant with the oil filter wrench! Those valves are a b*tch to get off!</p>
Does anyone have an idea where I can find some of these tanks. I really would love to make one of these.
You can find a steel recycle phon number in the yellow pages. If not your town maybe one close to you. Or you could goole it.
I discovered a GREAT source of old tanks. If you live in a big city there will probably be one or more recycling yards where they take in steel, iron, aluminum and stainless among other things. In one particulary large yard where I live (Dallas), they take old compressed cylinders and cut them in half with an oxyfuel torch when they reach the end of their usefulness and recycle them along with the other scrap steel. If you bring the yard enough scrap to recycle (they weigh you when you go in and when you leave), after you unload, pick up a few tanks, it's possible to get your tanks for free!
&nbsp;Instead of using a metal clapper, you could use a hockey puck. &nbsp;It's hard enough to give a good ring, but soft enough to make it more of a gong sound than a clang sound.<br /> <br /> I'm planning on making a &quot;temple bell&quot; from an old CO2 bottle from a keg-a-rator. (It's ok, I have another tank). &nbsp;I'll use a hockey puck as the clapper and a knot at the end as a handle.<br /> <br /> Great instructable! &nbsp;I'm sure I'll use it as my main source when I build mine.<br /> <br />
I was just looking at a CO2 tank for a soda system.. I think that would be wonderful! The Hockey Puck clapper idea is top notch, but, watch for the throw of the clapper rope.&nbsp; If you are hand ringing this should not be a problem, however you do not want a lot of throw in a wind powered apparatus. Cheers and PLEASE post some pics when you are done or at least make your own instructable!<br />
My instructable is up.<br> <a href="http://www.instructables.com/id/Compressed-Gas-Cylinder-Temple-Bell/" rel="nofollow">http://www.instructables.com/id/Compressed-Gas-Cylinder-Temple-Bell/</a>
Your project is brilliant! I can't wait to make one. Just gotta find an oxygen tank and we're in business!
I love this!&nbsp; I&nbsp;can't wait to see if I can find some old tanks to make a few!&nbsp; I think you did a great job on this instructable and thanks for also mentioning your mistakes so we could avoid them.&nbsp;
ooh, also what about an old razor scooter wheel for the clapper...just a thought
<em>Nobody likes filing?</em><br /> <br /> Now, now, let's not speak for everyone. I, for one, love filing. As a matter of fact, I consider my steel files to be among my most used and favorite tools.<br />
&nbsp;I used to work in a medical office..... Filing allllll flippin' day! *ugh*
Ah, <em>that kind of filing</em>. Excuse my lack of humor. <br /> <br /> Being that I'm an engineer, I don't have to touch much paperwork outside of my bills.<br />
&nbsp;Paintball CO2 tanks would probably be really good for this, I think I have a few old messed up ones... :D
Paintball tanks are usually aluminum, so they might not ring very well. Worth a shot, though.
&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp;&nbsp; Some aluminum rings like the best of bells. Ask any skilled drummer about the aluminum bells that look like cymbals.<br />
&nbsp;I wonder about using one or more of the throw away camping propane tanks...nic instructibles<br /> <br />
This is a great use for old tanks.&nbsp; Tanks!<br /> <br /> I&nbsp;think I can get the clank out of it for you and get you into a nice ring.&nbsp; I once made a xylophone for my daughters out of metal conduit and did a lot of research.&nbsp; It turns out that most solid objects will ring when you hit them.&nbsp; That ring sound is a series of waves that are fixed by physics.&nbsp; The wave forms a low amplitude spot at a point 22.5% of the length from either end.&nbsp; You can demonstrate this with any piece of wood or metal that is all the same size and density.&nbsp; Hold it at the top and hammer it to feel the vibrations in your hand. You will also notice that the object does not ring very long when you hold it at the end.&nbsp; That is because your fingers dampen the amplitude of the vibration.&nbsp; Work your way down holding it lower and lower hammering and feeling.&nbsp; When you get to about 1/4 the way down, you can hammer it and it will continue to ring for a long time even though you are holding it.&nbsp; You will also notice that you can barely feel the vibrations in your fingers at that point.&nbsp; This is a sweet spot you can use to your advantage.&nbsp; But your bell is not uniform at both ends to take advantage of this physical concept.&nbsp; <br /> <br /> What I suggest is you cut the top off to make it a tube with both ends open.&nbsp; Measure the length to find the 22.5% mark.&nbsp; Hold it and ring it a few times to demonstrate to yourself that you have the right spot.&nbsp; Then drill a hole all the way through the tube at the 22.5% mark.&nbsp; Run a bolt (or something) through and hang the tube from that bolt.&nbsp; You can also hang your clapper from that bolt.&nbsp; <br /> <br /> Another problem with your pipe is the welded seam.&nbsp; Any unwelded material will have a nicer ring to it.&nbsp; <br />
I imagine that a row of these, of different lengths, might sound like a <a href="http://www.instructables.com/id/How-to-Build-a-Hank-Drum/" rel="nofollow">hank drum</a>...?<br />
Oh, I've thought of a way to make the chime more sonorous (you know, bongy instead of clangy) - put a layer of felt or thin rubber around the clapper-weight.&nbsp; It's what they use on the end of the hammer in a hand-bell.<br /> <br /> <br />
Fixed the &quot;CLANK&quot; with a little electrical tape wrapped around the clapper!!<br />
&nbsp;Do you think you could do this with an old propane tank from a grill?
I suppose you could, but, it would probably sound kind of tinny since the metal is so thin.<br />
Carnyboy:<br /> You can't start a post &quot;<em>When I was a kid I used to travel with the carnival</em>&quot;&nbsp; and just leave it there!!!&nbsp; What's the rest of the story?&nbsp; Where's your blog?&nbsp; I'm dieing here--from the need to know&nbsp; : o
The rest of the story is I am a third generation Carny.&nbsp; Basically my Grandfather got into the business after WWII and Korea and my Father got into it after Vietnam.&nbsp; I was born and raised in the carnival industry primarily traveling in Northern California and Oregon. I still do it to this day.&nbsp; ~fin~<br />
I saw something like this on a golf-course...<br /> Very nice.<br /> <br /> L<br />
&nbsp;what did it sound like when a golf ball hit it?
None of us hit it, but basically the same steel-bell, they make a good sound. (dog-leg hole &quot;please ring bell when green is clear&quot;)<br /> <br /> L<br />

About This Instructable


52 favorites


More by carnyboy: Compressed Gas Cylinder Wind Chime
Add instructable to: