Print PDF
Favorite
Email
Step 3Remove the valve stem
For the first one I did I held the stem in a vice and used an oil filter wrench to turn the tank.
Once the stem is out fill the tank with water to displace any remaining gas.
This time I just tried without the wrench and ended up breaking off the stem. DOH! I ended up having to cut the stem off by just cutting the tank a little lower on the neck.
Once the stem is out fill the tank with water to displace any remaining gas.
This time I just tried without the wrench and ended up breaking off the stem. DOH! I ended up having to cut the stem off by just cutting the tank a little lower on the neck.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
