Print PDF
Favorite
Email
Step 4Cut off the bottom
This is fairly straight forward, except the cutting blade wasn't large enough to do it in one clean cut. I had to turn the tank and keep it all in line to finish my cut.
Start the cut a few inches up from the bottom to clear the indentation built into the bottom of the tank.
NOTE: This can be done with an angle grinder with a cut-off blade, but, be careful to keep your cut clean and straight! Or don't if you want a different look!
Start the cut a few inches up from the bottom to clear the indentation built into the bottom of the tank.
NOTE: This can be done with an angle grinder with a cut-off blade, but, be careful to keep your cut clean and straight! Or don't if you want a different look!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
