Print PDF
Favorite
Email
Step 7Make the wind catcher
This part was just a bunch of eye-balling. I used to cut off portion of the tank to make the curve. I eyeballed the point for the hole. Over all the length was about a foot.
A jig saw, a 3/4" (or diameter suitable to your rope) hole drilled and some sanding to clean up the edged and I have a wind catcher!
A jig saw, a 3/4" (or diameter suitable to your rope) hole drilled and some sanding to clean up the edged and I have a wind catcher!
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
