Computer Cord Tamer - Monitor Style

Step 3 Step Three - Keep Workin

... eventually I ended up with something that I though would work. You are more than welcome to bend as big or as small as you went, it depends on how much stuff you have to hang. After I made these bends, I focused on bending a series of 90 degree bends in order to hook the "top" of the cord hanger on my monitor. I put my monitor hook in the middle of the hanger, making sure the hanger would squeeze the monitor ever so slightly. You will have to determine the width of your monitor and adjust from there. Mine ends up being about an inch in width.

After you make the top loop, I bent the hanger so that it the unused portion would rest on the back of my monitor and hold the cords away from the back of my monitor. (See the side view below)