Print PDF
Favorite
Email
Step 4Chalking
After a few days and peeling off the tape on the delicate cheap paint job that alienware provided... I began on the middle section...
I used prisma chalk (a soft art chalk) to mark all the designs on the flat paint before i started to etch...
At first I used a dry erase marker but the marker wouldn't erase. The only way to remove it was to use a small amount of thinner which smeared the red paint. DONT USE DRY ERASE****
I used prisma chalk (a soft art chalk) to mark all the designs on the flat paint before i started to etch...
At first I used a dry erase marker but the marker wouldn't erase. The only way to remove it was to use a small amount of thinner which smeared the red paint. DONT USE DRY ERASE****
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
