Print PDF
Favorite
Email
Step 7Engraving and finishing up..
Engrave the remaining detailed areas and clear coat the whole thing.
(I went over the bigger areas with some sandpaper about 220 grit to soften up the engraving lines)
(I went over the bigger areas with some sandpaper about 220 grit to soften up the engraving lines)
| « Previous Step | Download PDFView All Steps | Next Step » |
3
comments
|
Add Comment
|
Apr 14, 2007. 12:06 PMdinsterzz
says:
what dremel bit did u used?
Reply
1
May 10, 2007. 2:59 PMionix (author)
says:
105 and 107
Reply
Aug 30, 2007. 4:23 PMCiwan
says:
When you say clear coat the whole thing, what do you exactley mean ? sorry I'm a newbie. do you mean you apply some sort of liquid on top ? Thanks
Reply
1
Aug 31, 2007. 10:36 PMionix (author)
says:
yes... you can actually buy spray on clear coat... its the same if not similar to the clearcoat on automobiles... it protects the paint you can get it at any hardware or automobile parts supply store... usually
Reply
 |
Add Comment
|
