Print PDF
Favorite
Email
Step 7Cutting to Fit
After placing all the full pavers that would fit I needed to cut some to fit in the remaining spaces. I had a diamond blade for my circular saw that I'd bought for $20 and it worked great. I used it dry but would advise anyone to buy an enema kit or IV bad and set up some sort of water flow to keep things cool.
Also some advise I got that I should pass along (I didn't follow it, stupid me) is to look around the tool shops for an off brand, super-cheap circular saw to use. The dust that is produced can get sucked into the motor and really kill it.
I filled almost all the remaining space then ran our of pavers. Since there were just a few small gaps left I filled them with gravel.
Also some advise I got that I should pass along (I didn't follow it, stupid me) is to look around the tool shops for an off brand, super-cheap circular saw to use. The dust that is produced can get sucked into the motor and really kill it.
I filled almost all the remaining space then ran our of pavers. Since there were just a few small gaps left I filled them with gravel.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
