Print PDF
Favorite
Email
Step 2Putting it together
Install the LED's into the holders, and attach the holders to the bottle tops.
(Note, the longer leg on the LED is positive, so hook your wires up accordingly.)
Add some thin wire to the LED's(I use an old phone cord), and attach the wires to your speaker wires. This will only work on amplified speakers, or speakers that plug into the wall.
(Note, the longer leg on the LED is positive, so hook your wires up accordingly.)
Add some thin wire to the LED's(I use an old phone cord), and attach the wires to your speaker wires. This will only work on amplified speakers, or speakers that plug into the wall.
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Jul 30, 2008. 11:32 AMvpsekharan
says:
The circuits and building instructions are very intersting.
Reply
 |
Add Comment
|
