Use your fabric/thread/ribbon scraps to make this unique fabric.

Step 1:

Cut out two pieces of dissolvable stabilizer.

Step 2:

Place fabric scraps, I call it confetti, on top of the dissolvable stabilizer
Make multiple layers of confetti.

My confetti comes from my serger scraps, French seam trimmings, silk ribbons and bias scraps left over from garment cuttings. This is a great way to put all those scraps to good use!

Step 3:

Place the second piece of dissolvable stabilizer on top of the confetti.

Step 4:

Baste the layers together.
Both horizontally and vertically.

Step 5:

Set your sewing machine on a wide zig-zag.
Select thread that compliments your design.
Sew the layers together.
Again, both horizontally and vertically.

Step 6:

Rinse the fabric in water.
Repeat until it no longer feels sticky.

Step 7:

Let the fabric air dry on a flat surface.

Step 8:

Remove the basting threads.

Step 9:

If you are going to make something from the garment....make the garment first.... then wash. Once the confetti fabric is free of the dissolvable stabilizer it is nearly impossible to sew.

This is truely groovalicious!