Introduction: Connected Temperature

Picture of Connected Temperature

Connected Temperature is a weather station dedicated to temperature. Hosted on your raspberry pi, it will use your DHT22 sensor to pickup the indoor temperature. For outdoor temperature (and those of the following days) it will use the Internet.

All these data will be available on your favorite web browser and even on your smartphone (thanks to responsive design)

Step 1: Connect the Sensor

Picture of Connect the Sensor

Connect the data wired of your sensor to the GPIO4 of your raspberry.

If you have a problem https://learn.adafruit.com/downloads/pdf/dht-humidity-sensing-on-raspberry-pi-with-gdocs-logging.pdf

Step 2: Install the Server

git clone https://github.com/raffi3438/Connected_Temperature.git cd Connected_Temperature

Step 3: Install the Library for the Sensor

git clone https://github.com/adafruit/Adafruit_Python_DHT.g...

cd Adafruit_Python_DHT

sudo apt-get update

sudo apt-get install build-essential python-dev

sudo python setup.py install

cd ../

Step 4: Run the Server

sudo python ./Server.py

if you want run the server from an other repertory that Connected_Temperature (cd the_path_of_Connected_Temperature && sudo python ./Server.py)

i.e. (cd /home/pi/Connected_Temperature && sudo python ./Server.py)

Step 5: Enjoy

go on your favorite browser and write the url ip_of_your_raspberry:8080

Step 6:

Comments

tomatoskins (author)2015-05-18

This looks great! Thanks for sharing and welcome to the community!

RaffiT (author)tomatoskins2015-05-20

thank you :)

About This Instructable

1,318views

25favorites

License:

More by RaffiT:Connected Temperature
Add instructable to: