Introduction: Connecting LinkIt Smart 7688 Duo to Cayenne

Picture of Connecting LinkIt Smart 7688 Duo to Cayenne

First, you must to configurate the LinkIt on Station Mode, and connect this to your Private Wireless Network. For details see this project (mine) on Hackster:https://www.hackster.io/LaurenceHR/getting-started-with-station-mode-of-linkit-smart-7688-duo-34c0f0

Step 1: Connect to LinkIt Console With a USB to TTL Adapter

Picture of Connect to LinkIt Console With a USB to TTL Adapter

Step 2: Enable Bridge

Picture of Enable Bridge

Step 3: Create New Device on Cayenne (select Arduino Yun) PreviousNext 1 2 3

Picture of Create New Device on Cayenne (select Arduino Yun)    PreviousNext 1 2 3

Step 4: Upload Base Sketch

Picture of Upload Base Sketch

Step 5: Create New Widget (Ligth Actuator With Virtual Pin)

Picture of Create New Widget (Ligth Actuator With Virtual Pin)

Step 6: Upload New Sketch

Picture of Upload New Sketch

Step 7: Test the Ligth Switch

Picture of Test the Ligth Switch

Comments

germancasteli (author)2016-10-10

I will try this, thank you.