Print PDF
Favorite
Email
Step 2Unscrew the float ball from the metal rod
Unscrew the plastic ball from the end of the metal rod.
Be careful with this step, as you don't want to damage the plastic valve assembly.
Most likely the treads will be corroded a bit and it might be a little stubborn, so use a pair of pliers to grab the rod while you unscrew the ball.
Be careful with this step, as you don't want to damage the plastic valve assembly.
Most likely the treads will be corroded a bit and it might be a little stubborn, so use a pair of pliers to grab the rod while you unscrew the ball.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
