Introduction: Consolidate Your USB Chargers

Picture of Consolidate Your USB Chargers

I always seem to have extra USB chargers lying around, and cluttering my outlets. I got to the point where I was tired of dealing with them all, so I decided to combine them into a single super-charger.

Step 1: Materials

Picture of Materials

Tools:

Solder Gun/Solder

Wire Strippers

Electrical Tape

Materials:

USB Charging Cables

Step 2: Trim the Cabled

Picture of Trim the Cabled

Snip the USB part off of each charger, but make sure to leave one USB part with enough cable to strip.

Step 3: Strip the Wires

Picture of Strip the Wires

Strip the cables and each of the wires within them.

Step 4: Solder the Wires

Picture of Solder the Wires

Wrap the exposed parts off the same colored wires together, and solder them together. You only have to do this for the power and ground wires, but I did it with all of them because I felt like it.

Step 5: Tape Up the Wires

Picture of Tape Up the Wires

Tape up each soldered part. Then tape all of the bundles together.

Step 6: Enjoy Your Super Charger

Picture of Enjoy Your Super Charger

Thank you for reading my Instructable. I hope it was of help to you.

Comments

private_1 (author)2016-04-20

it would break easily because you just taped them together

About This Instructable

513views

5favorites

License:

More by Mx Markov:Consolidate Your USB ChargersTurn An Old CPU Cooler Into a New Soldering FanHideaway Film Strip
Add instructable to: