Print PDF
Favorite
Email
Step 2Opening (and modding) the keyboard
Crack open your keyboard and remove the circuit board (mine had a zillion screws holding it in)
then locate the lights and solder the wires to the legs of the LEDs (see picture)
when done put the keyboard back together. you may need to cut a hole for the new wire to get out
important note: not all keyboards work with this
then locate the lights and solder the wires to the legs of the LEDs (see picture)
when done put the keyboard back together. you may need to cut a hole for the new wire to get out
important note: not all keyboards work with this
| « Previous Step | Download PDFView All Steps | Next Step » |
1
comment
|
Add Comment
|
Nov 16, 2007. 1:10 PMQtronik
says:
On my wireless keyboard, I take the receiver plugged on my usb computer... for those who thinks they can't do it bcz they do not have cord keyboard.
Reply
 |
Add Comment
|
