Assemble Edison board, install software, write a little JS code, dance robot, dance.

Step 1: Snap the Edison Board Together

Take board out of box, pop in the chip.

Step 2: Test Board With Blinky Demo

Build and run Blinky demo that blinks LED on the board.

Step 3: Cylonjs

Install Cylonjs, write a little code, and start robot dancing.

Step 4: Dance, Robot, Dance!

Edison connects over Bluetooth LE to make robot dance.

<p>Not much information, especially MIP command interface.</p><p>See <a href="https://github.com/WowWeeLabs/MiP-BLE-Protocol/blob/master/MiP-Protocol.md" rel="nofollow">https://github.com/WowWeeLabs/MiP-BLE-Protocol/blo...</a></p>
<p>Cool Edison project.</p>

About This Instructable




More by robinrowe:Control MIP Robot with Intel Edison 
Add instructable to: