AS YOU CAN SEE IN THE PHOTO YOU CAN EASILY SEE THE COMPUTER MONITOR IS WELL SHOWN ON THE IPOD.
IF YOU DECIDE TO SET IT UP ON PAGE 4 HAS SOME HANDY TIPS TO GET THE BEST OUT OF THIS PROGRAM
Step 1: Instructions
second make sure you have a wirelss router conecting all your devices up
third install VNC Lite on your Mac or Windows based computers
click on this link to download VNC lite on your computer
Step 2: Setting it all up part 1
go to your computer and find UltraVNC Server on your desktop and open it up
you should see all highlighted box saying password, you will need to set it and uncheck the two boxes shown on the picture below. (this will allow you to see what you have moved on the screen and see all that is happening on both screens.)
Press apply when you have finished this section.
Step 3: Setting it all up part 2
Go to MENU, then Edit Connection and that should lead you to the Host List
Click on the first Not Used row
Now its the connecting part now.
Where it says VNC Server Ip address type in your IP address which should start as 192.168.... then finish it off.
Leave it the VNC Server Port empty ( I didn't have to change it so you shouldn't )
Then type in the password from your computer from eariler