loading

Step 4: Dissasembly

Picture of Dissasembly
First step is to UNPLUG the lamp. do not jut turn it off, unplug it.

Now look into the top of the lamp. It should look something like the picture, a cage covering the lamp assembly. Take everything out, the cage, the lamp socket, the metal plate. You may have to cut the wires to the lamp holder. Cut them as close to the holder as you can. You will need these wires later.
 
SIRJAMES093 years ago
so far(step 4) I like the way you're writing this...safety first & everything falls in behind that. smart. very smart. :0).