Introduction: Convert Your Jigsaw Into a Bench-top Saw Using an Old Computer Desk

Step 1: Tools

Old computer desk

Eye protection

Dremel

Hammer

Chisel

Measuring tape

Bolts and nuts

Pencil

Jigsaw

Drill

Step 2: Holes in the Jigsaw Base

Disassemble the jigsaw base

Drill the holes

Step 3: Marking the Computer Desk

Use a pencil to mark the position of the jigsaw base and the holes in the computer desk

Step 4: Holes in the Computer Desk

Use the machine drill to make the roles

Step 5: The Hole for the Saw

Use the dremel to cut the hole

Step 6: Digging the Table

Use the chisel to dig the hole for the jigsaw base

Step 7: Assembling

I used and worked

Comments

author
sumtonian (author)2016-04-12

Excellant work really tempting and inspiring !

Thank You

author
seamster (author)2015-09-16

Thanks for sharing your version of this project. Looks useful!

author
faustopenello (author)seamster2015-09-16

Thanks, it's very usefull but i will need to make some improvements.

About This Instructable

2,409views

19favorites

License:

More by faustopenello:Brazilian native stingless bee - 3d printing honeycombConvert your Jigsaw into a bench-top saw using an old computer desk
Add instructable to: