Instructables

Converting Fluorescent Magnifying Lamp (T9) to LED -- 840 Lumens 5.5 Watts (120Vac; 220-240Vac; 100Vac)

The LED PCB Ring is designed to replace Fluorescent T9 light bulb on magnifying lamp fixture.
When ballast "croaked", it is TIME to get rid of it PERMANENTLY.
Also, when the T9 Fluorescent light bulb starts FLICKERING, it is TIME to convert to SOLARA-USA LED light.

840 Lumens 5.5 Watts
NO BALLAST, NO EXTERNAL POWER SUPPLY, NO EMI, NO RFI, NO HEAT.
35000 Hours of operation (16 years if used 6 hours a day)
(see E. Specs sheet for full specs)

We, SOLARA-USA, designed & "crafted" an LED PCB that RETROFITs T9 Fluorescent light bulb -- exactly the same dimensions.
For your part, you will need to do the conversion yourself.
The RING comes as a KIT w/:
-5x HEX standoffs
-2x Wirenuts
-E6000 Epoxy (this one STICKs very well to painted metal)

See Conversion Photos -- step-by-step.

The KIT is available in 120Vac; 220-240Vac & 100Vac -- all on Amazon:
120Vac 60Hz -- USA & CANADA
http://www.amazon.com/gp/product/B00FWUMZF6

220-240Vac 50Hz -- UK, E.U., AUSTRALIA, NEW ZEALAND
http://www.amazon.com/gp/product/B00JPB8MWI

100Vac 50/60Hz -- JAPAN
http://www.amazon.com/gp/product/B00JV9JM32

Visit our Storefront on Amazon: http://www.amazon.com/shops/M_SOLARAUSA_11784139

Any questions, email us: seth@solara-usa.com

Ph# 001-562-881-5810 USA - PST

On-on,
Seth

 
Remove these adsRemove these ads by Signing Up
baecker039 months ago
would be a better idea to use pwm to control the brightness
Johnny J9 months ago
More of an advert than an Instructable, eh?