Print PDF
Favorite
Email
Step 10Ream the Peg Holes
Use the fine tool you made in Part 1: Peg Hole Reamer.
Remember to ream every other hole from the other side.
Don't make the holes too big. The knobs should be at least 1/4" out.
Drill and ream the neck for the thumb string peg hole. I drill the hole all the way through so the chips can go somewhere.
Remember to ream every other hole from the other side.
Don't make the holes too big. The knobs should be at least 1/4" out.
Drill and ream the neck for the thumb string peg hole. I drill the hole all the way through so the chips can go somewhere.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
