Print PDF
Favorite
Email
Step 6Make the pot holder
If you don't already have one, you can quickly create a pot holder from a wire hangar.
The ideal height is about 1/2" to 1" above the height of the stove, or right at the tip of the flames. The flame height it determined by the type of fuel you use, and the size of the jet holes.
Make sure to sand off the coating before you use it. You don't want to breathe those fumes.
The ideal height is about 1/2" to 1" above the height of the stove, or right at the tip of the flames. The flame height it determined by the type of fuel you use, and the size of the jet holes.
Make sure to sand off the coating before you use it. You don't want to breathe those fumes.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
