Introduction: Cool Origami Couster
Step 1: Start
For this project you need to start with a Basic Base. Base 1. Refer to my previous instructable on hour to make that.
Step 2: Folding Begins
There are four mini squares . Star with one of them and than do the same for the others. Start with point A and move it to the center line. Do the same with the other side.
Step 3: More Folding
Take what you just folded and open it up. it should have a little pocket. After you open it push it down flat. Do the same with the other side. Repeat the last step and this step for all of the squares
Step 4: Finish
Finish! Thanks for reading if you have any questions please leave a comment