Print PDF
Favorite
Email
Step 2Tools
Tools
A vice (and bench)
A powerdrill
A file or debrring tool
A pipe cutter
or A hacksaw. (If you are using a saw you will need a miter block)
A blowtorch and lighter
Old gloves, these will need to insulate you from hot pipe
An old newspaper, this will protect yor work surface and insulate you from hot pipe.
Wet + Dry paper (a fine form of sandpaper)
A drillbit (for a standard schrader valve you will need a 5/16)
A fairly large spanner - My adjustable one was too small. I used a mole grip and wish I'd looked for a proper spanner.
A bike pump, for your valve.
A vice (and bench)
A powerdrill
A file or debrring tool
A pipe cutter
or A hacksaw. (If you are using a saw you will need a miter block)
A blowtorch and lighter
Old gloves, these will need to insulate you from hot pipe
An old newspaper, this will protect yor work surface and insulate you from hot pipe.
Wet + Dry paper (a fine form of sandpaper)
A drillbit (for a standard schrader valve you will need a 5/16)
A fairly large spanner - My adjustable one was too small. I used a mole grip and wish I'd looked for a proper spanner.
A bike pump, for your valve.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
