Print PDF
Favorite
Email
Step 2
The new part: to connect lights and camera.
(mine sure will not win a beauty contest, but perhaps later I'll finish it nicely)
The size and shape of the lights determine the design.
3 lights will cancel out most shadows
I just took a scrap piece of wood and cut the brackets to size.
The spots required holes of 13 mm; some smaller holes had to be drilled in some brackets as well.
Lights on both sides and in front on the lower side of the wooden block, the bracket for the camera on the upper side in the middle.
(mine sure will not win a beauty contest, but perhaps later I'll finish it nicely)
The size and shape of the lights determine the design.
3 lights will cancel out most shadows
I just took a scrap piece of wood and cut the brackets to size.
The spots required holes of 13 mm; some smaller holes had to be drilled in some brackets as well.
Lights on both sides and in front on the lower side of the wooden block, the bracket for the camera on the upper side in the middle.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
