Step 1: Supplies
-Another piece, size depends on how long you want it, 3ft is good to start with (not gutted)
Both will be trimmed and melted when finished.
Step 2: Lanyard Knots
Step 3: Cobra Weave
Single colored instruction
-Tie the two colors together using a square knot or melt them together
-Put the piece behind the other piece with lanyard knots, equally on both sides (Square knot centered)
-Create an "S" with the piece on the right and then take the piece on the left and slide it through the bottom part of the "S" and then behind the middle and up through the left side.
-Pull tight and repeat.
-I recently saw the Paracord Survival Necklace in which there is a flint inside of the cobra weave. That idea can be easily included in this as well. Just place your flint steel in between the two lanyard knots and continue as if it weren't there. If you make a longer key fob with the flint steel it can easily be considered a Survival Key Fob.