Cord Organizer

Published

Introduction: Cord Organizer

Step 1: Finding the Tools

Toilet paper rolls
Shoe box
Pencil or pen
Glue
Spray paint ( if desired color )

Step 2: Tracing

Trace the paper rolls inside the shoe box with the pen or the pencil. On the outside of the toilet paper rolls.

Step 3: Not Enough

If you don't have enough rolls cut the part off

Step 4: Glue

Put glue on the trace marks , preferably hot glue or gorilla glue. Put the toilet paper rolls on the glue. Let the glue dry.

Step 5: Spray Paint

Ou can spray paint if you want color on your intractable project. Spray paint it on the inside in the tubes and outside I them ( if not sticking )
Wait until the spray paint is dry it can get on your cords and shirt. Wear a shirt that is not liked and can get ruined. CAUTION SPRAY PAINT IN FLAMMABLE use it outside or in a open garage. IT IS ALSO BAD FOR BREATHING. I am not responsible for any injury

Step 6: Finish

Now you have a simple organizer for your cords.

Share

    Recommendations

    • Oil Contest

      Oil Contest
    • Creative Misuse Contest

      Creative Misuse Contest
    • Water Contest

      Water Contest

    Discussions