Step 11: DONE!!!!!
CHEAP and EASSSYYYY
did i say cheap and easy, my total cost was $8, only including glue, and a new motor, everything else i had on me but the total cost without a transmitter or reciver is UNDER $20
thats right! $20
Happy flying i hope you enjoyed this instructable, the biplane currently sits in my shed having flown a spectacular maiden flight of over 6 minutes before the lipo ran out!
very stable in the air and very very slow!
><ROBBO><
did i say cheap and easy, my total cost was $8, only including glue, and a new motor, everything else i had on me but the total cost without a transmitter or reciver is UNDER $20
thats right! $20
Happy flying i hope you enjoyed this instructable, the biplane currently sits in my shed having flown a spectacular maiden flight of over 6 minutes before the lipo ran out!
very stable in the air and very very slow!
><ROBBO><
Remove these ads by
Signing Up
Visit Our Store »
Go Pro Today »
Landing gear?
Even a 30 seconds on a cameraphone uploaded to youtube would really help.
Thanks for the ible