Instructables
Okay, so this is really going to be an incredibly simple build. I was just bored, enjoyed making my last instructable, and decided to see if I could throw something together with (guess what?) an Altoids tin and a Bic Pen. Naturally, my mind went to fire, but I didn't want to start a theme, and I couldn't see the Bic Pen being good for multiple flame related uses. So the next best thing, 'Wonder what I could make that you could put your eye out with?"

And thus, the birth of the Altoids Dart Gun.

Ever have a problem with that annoying neighbor that always borrows your stuff and doesn't return it? Perhaps the office mate that always seems to get the promotions that you deserve when they spend 80% of their day playing solitaire and the other 20% at the water cooler talking about the boat they're going to buy with their new raise?!?! But I digress...

Now, with the use of this new weapon, and some curare (this you'll have to find a recipe for on your own... If found, please notify me) you can take care of these pesky individuals. Or at least put your eye out for spite.

Don't let the simplicity of the build fool ya. This thing has some range.
 
Remove these adsRemove these ads by Signing Up

Step 1: Collecting The Materials

Picture of Collecting The Materials
You will need the following:

  • JB Stik
  • Bic Pen
  • Thin copper wire (I used magnet wire.)
  • Wire Hanger
  • Bead (As close to the inside diameter of the Bic Pen as you can find.)
  • Rubber Band
  • Dremel

Step 2: The Barrel

Picture of The Barrel
As I only have the already assembled Altoids Tin, and no spare Bic Pens, Tins, or even rubber bands for that matter, you will be forced to deal with my drawings of the device.

For the first step, you will want to create the "barrel" of the gun. To do this, after removing the guts (read: ink tube) of the Bic Pen, cut it to the inside length of the Altoids tin.

Once cut, use the Dremel to cut "channels" on opposite sides of the barrel as shown in the drawing (image 1).
1-40 of 55Next »
themoose641 year ago
Cool I put this in my altoids tins creations guide.
pieman125 years ago
could you use gorila glue
Javin007 (author)  pieman125 years ago
I certainly wouldn't recommend it. Gorilla glue pretty much sticks to nothing but human skin (and that it binds to on contact, forever). It takes *FOREVER* to dry, and when it dries, it becomes so brittle the slightest pressure will break the "seal."

I honestly haven't found anything that Gorilla Glue is actually good for, which is why I'm not entering the contest.
Gorilla Glue is actually a marvelous art medium. It can be drizzled, blobbed, etc onto a canvas or board, left to set up, and then painted to create wonderful movement and texture in a piece.

However, I once found out the hard way that gorilla glue does not work to mend plastic eyeglass frames. Trust me, you don't want to know.
Javin007 (author)  mslaynie3 years ago
Perhaps they should rename it to "Gorrila Art Medium?" Because as glue, it's fairly useless.
i fixed a telescope with it and it still holds after two years of abuse
*laughs* It's possible. But hey, I have a great use for it! :D
Really? it always fixes my glasses :)
It didn't bond to my glasses, but it bonded to everything else... the bamboo skewer I was using, my hands, etc. It was... interesting, to say the least!
Hm, wierd. I always use it when my glasses ear piece walls off. i just stick a dab of glue on and set it on a paper towl to dry overnight. then i cant close that side of the glasses, but it works :)
Do you mean the Gorilla Glue Super Glue or just the regular Gorilla Glue? I meant the original, expanding, wet-each-surface-and-clamp glue. It wasn't good.
im... not sure. I dont break my glasses anymore, but im pretty sure it was just "gorrilla Glue" so... idunno.
Cubie2 Javin0074 years ago
gotta agree w/you.
wmiddleton2 years ago
Very nice instructable, i might build one if i can find the parts lying around
an extra touch could be a small laser pointer next to the barrel to act as an aiming device. =)
It would be col if you could modify it to shoot altoids- then you could put altoids over the piping inside and noone would know!
Me like, me want
i want to make this so bad but i cant figure out that pic
If i have read this right.. he glued/ puttied a smale wire hook to the end of the gun (shooting end i believe?) which is large enough to hook onto the rubber band, but small enough so the tin can close.
Yes very true words there chap
Does it have to be copper?
Hey, a video in high speed of this would be so epic! Only if you can though...
Javin007 (author)  thomasthetankengine3 years ago
:) I did look into the cost of getting a truly high-speed camera, but I was shocked at the going rate of them. Some people RENT them (with a technician) for as much as $500-$1000 per DAY. Would have to pass on this one.
I don't get this or step 5.
Erm, where is step 2? Is step 2 where you do something with the bic pen, like cut it open or something? Cause i just don't understand how this would work
the bic pin is the barrel
bromanuzak3 years ago
did it w/ a dip tin ;)
whats jb stik
Epoxy putty.  Effectively, a very strong adhesive.  Easy to find at most hardware stores in the adhesives and glue section.
Javin007 (author)  Madrias3574 years ago
Well, more accurately, it's an expoxy putty that can handle heats up to 500 degrees Farenheit.  It's also conductive, so is handy for electronics, too.
If I'm trying to work on electronics, I'm getting the soldering iron out and using that.
Javin007 (author)  Madrias3574 years ago
Sometimes the components are too heat sensitive, or you're just in a hurry.

I cheat and use alligator clips as a rudimentary heat sink.  As for being in a hurry, I understand that.  However, I will not use epoxy putty on a circuit board.
lol i made something like this, it was sweeeeeeeeeeeeeet!
Colonel884 years ago
I don't really get the firing mechanism and such, I get the hammer and plunger thing, but not how it cocks and is triggered
Never mind, video cleared it up a LOT
toaignika5 years ago
wouldn't this be... well... dangerous?
Javin007 (author)  toaignika5 years ago
99% of the stuff on this site would be dangerous if not handled maturely and with some common sense.
Cubie2 Javin0074 years ago
:)
true
ItsTheHobbs5 years ago
Perfect mechanism for a trip wire.
1-40 of 55Next »