Print PDF
Favorite
Email
Step 6A) Enclose the stall: Assemble the lid
Have the Plexiglas and the aluminum within reach at the shower stall. Place the Plexiglas in position, and then place the aluminum L extrusion under the front edge. You could glue or screw them together, but I didn't find that to be necessary.
The aluminum piece is necessary: I first tried without it, but found that the Plexiglas wasn't stable--it would flex and fall down every once in a while. (Note the broken corners which I crudely patched--don't let that happen to yours!)
The aluminum piece is necessary: I first tried without it, but found that the Plexiglas wasn't stable--it would flex and fall down every once in a while. (Note the broken corners which I crudely patched--don't let that happen to yours!)
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
