Introduction: Craft Ribbon Holder
I was tired of all my rolls of ribbon being thrown together in a box, so I made this nifty holder out of stuff around the house....
Old wooden closet rod
11 chop sticks
Step 1: Next...
First I cut the rod to the length I wanted, then drilled holes (at an angle) staggering them around the rod.
I sanded down the squared ends of the chop sticks to make them a little rounded.
Pour wood glue in the hole and jam in the chop stick.
Let dry and touch up around the holes with more glue.
Step 2: Lastly....
Spray paint the holder your color of choice.
Drill a hole through the top and thread a piece of string or install an eyebolt in the top for your method of hanging.