loading

This is a waste of time don't make this

I made this for a school project because I had to

Step 1:

measure out and draw your salt shaker outline. make sure you have rectangles to attach to the inside of the faces

Step 2:

cut out the salt shaker design

Step 3:

Add details and shade in such as adding an S for salt and making the cap grey

Step 4:

Fold the salt shaker design on the lines

Step 5:

Glue or tape together the design. glue the diagonally striped areas to the insides of the salt shaker faces.

Step 6:

Put the cap on top of the salt shaker body and try not to regret the time you wasted doing this

<p>Haha I love your salt shaker!</p>
<p>Easier yet--take a piece of paper, and fold it around a teaspoon of salt. I like to fold opposite sides into thirds over the salt, because after the second pair of sides are folded in, one end can be tucked into the other, closing the packet. Then when I need a pinch, I can open the paper and pinch away, saving the rest for later. The best part is, this is so tiny and thin, it can go anywhere. You can use gourmet seasonings any place you like</p>

About This Instructable

71views

0favorites

License:

More by rhyss7:crap paper salt shaker 
Add instructable to: