Instructables
Picture of Crayon Plushie
This is a cool little project to do when your board and u want to do something and the result is pretty cool to!
 
Remove these adsRemove these ads by Signing Up

Step 1: What You'll Need

Picture of What You'll Need
You will need... {1}-2 sheets of some type of fabric... Any color (I used felt) 10cm by 13cm. {2}- 2 sheets of fake leather or fake leather like material 9 by 9. {3}- thread- color of your choice {4}- stuffing or fluff and a marking pencil

Step 2: Step 2

Picture of Step 2
Now take the yellow fabric and sew the ends together into a tube (make it however wide you want it.) And cut of the access fabric that you don't want.

Step 3: Step Three

Picture of Step Three
Take the (color of fabric u chose) that u have left and cut out a circle that fits to the end of your tube (whatever end you want.)

Step 4: Step Four

Picture of Step Four
Now you should have just enough fabric to make the tip of the crayon. Cut a strip that is as wide as you want it to be and as long as the width of your circle you chose to start the crayon ( a funnel shape). Now sew it into a circle with a skinnier top and the width of the rest of the crayon top and add it to the top of the crayon that has a empty whole. Which is extending the top.

Step 5: Step 5

Picture of Step 5
Now that that's done there should be a tiny whole at the top of the "crayon" insert the stuffing then cover it up with the right amount of fabric cut into a circle.

Step 6: Step Six (optional)

Picture of Step Six (optional)
Now this part is optional.... Take the leather like material you chose and cut it into 3cm wide and however long the width around your crayon is. And I used a special fabric whole puncher thingy to punch stars into it but you choose if you don't want a design now hand sew it the the crayon at the end and near the tip
So cute. This would be even better with a pattern or drawing of the pieces you used to follow!
Pro

Get More Out of Instructables

Already have an Account?

close

PDF Downloads
As a Pro member, you will gain access to download any Instructable in the PDF format. You also have the ability to customize your PDF download.

Upgrade to Pro today!