Print PDF
Favorite
Email
Step 10Power Supply
Solder two of mouse wires to the circuit power supply wires.
Cut the connector at the other end of the mouse wire and solder the wires to a battery holder.
You can use the power coming through the mouse wire from the computer main board instead of cutting mouse connector and using 4 batteries but it is not recommended because it may cause damages to your main board.
Cut the connector at the other end of the mouse wire and solder the wires to a battery holder.
You can use the power coming through the mouse wire from the computer main board instead of cutting mouse connector and using 4 batteries but it is not recommended because it may cause damages to your main board.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
