Create Real working iPod Costume(s)

Step 5 Some face time with foamboard

I wanted a really clean look for the iPods, so I decided to use foam board, specifically for the front.  Using the measurements from either iPod box, I traced out the outline onto the foam board and cut out using a box cutter.  Rather than sharp corners, I drew small round edges to mimic the actual iPod, giving it a more polished look.

Once the foam board is cut, you can immediately paint whatever color you want you'd like.  The good news, foam board doesn't require any "Primer".   

Blue iPod:  I created the wheel using foam board.  I then used a hot glue gun to paste it onto the front.  Keep in mind that hot glue dries quickly, so plan ahead and know the position of where you'd like to place your wheel.

Red iPod:   I made a ring that resembled a wheel from paper as a stencil, so when I painted the foam board red, this area would remain untouched.   Then drew the Menu items onto the wheel and
outlined in black marker.

Tip:  Coffee is our friend....there's no such thing as too much sugar!!!