Create a Star Trek Communicator edition RAZR

Since the Star Trek Communicator was the inspiration for todays flip phones, why not make your phone look more like the original. I did and here's how.

Here's the materials you'll need, it's a pretty short list;

1) A 2 piece plastic skin or shell for the model of phone that you have (unless you choose to case mod the actual phone), mine ran me ~$10.00
2) Spray Paint - (1) can of flat black and (1) can of gold
3) Steel wool or fine (600) grit sandpaper
4) a 3/32" drill bit*
5) 3/8" power drill*

*Optional, only needed if you intend to drill the flip cover shell for that added touch.

You'll want to rough up the plastic parts slightly with either some steel wool or fine grit sand paper, so that the paint will stick a little better.

If you really want to go all out, you can drill the flip cover piece with a series of holes (to give it a more authentic "grill" look). I drill a few holes in mine using the flip cover of my replica communicator as a template to get the pattern of the holes correct.

To just get the basic Communicator look, the base cover piece, for the the phones keypad section, will be painted black. The piece that attachs to the flip cover/screen will be painted gold.

Follow the instructions on the brand of paint that you buy for painting and drying time.

Once the paint is dry, just snap the parts in place and viola, you're really to beam up to the Enterprise. Ideally I'd like to find some brass stock with the right kind of perforations and form a "grill" cover from that material. But that'll be a project for another day.