Introduction: Create a VU Meter and Disco Led Using Raspberry Pi Visual Programming

Create a simple music player with a VU Meter and a disco light. You need:

- 10 LEDS
- A Raspberry Pi model B
- breadboard
- 1 RGB LED
- 10 220Ohm resistors
- jumper wires

You can program it using Wyliodrin at www.wyliodrin.com.



Comments

author
gago.babic.3 (author)2015-02-14

can you share code . on that site I can not save.

About This Instructable

6,241views

42favorites

License:

More by wyliodrin:Blink a LED from a browser using Visual ProgrammingFade a LED with a potentiometer on Intel Galileo and Visual ProgrammingBlink a LED on Intel Galileo and Visual Programmig
Add instructable to: