Introduction: Create the Stamp Base

The following information is a single lesson in a larger Tinkercad project. Check out this and more projects on Tinkercad.

Return to Previous Lesson: Introduction

Lesson Overview:

Now we're going to make a solid base for the stamp.

Step 1: Create the Stamp Base

Let's create a platform we can build from. A simple box sized to the correct dimensions will be a great starting point.

Below you can see an image of a few different stamps. In this lesson we will build the stamp with circles, but once you have had enough practice you will get a chance to design a stamp of your own.

Let's get building!

Instructions

  1. Drag a cube (box) on to the workplane and size it to be 50mm long, 10mm wide, and 3mm tall.
  2. Select the shape and use the Inspector window to select a color you like, I will make my shape yellow.
  3. Continue to the next lesson.

Continue to the next lesson

In the next lesson you will learn to add rings to the stamp.

Next Lesson:Create Your Rings

Comments

About This Instructable

141views

0favorites

License:

More by tinkercad-support:Create a 3D Printed Penny WhistleCreate a Penny WhistleCreate Your Superhero Suit
Add instructable to: