loading

Step 4: Stabby

Picture of Stabby
HPIM6969.JPG
HPIM6970.JPG
HPIM6971.JPG
HPIM6979.JPG
Once you have a happy little army of X's unroll a piece of copper wire and cut it, about 2" in length, pull it straight.

Use your little wire needle to stab a hole through your little X's

Stab the X where the seam between the clay strips meats from one side to the other.

Give the wire a little wiggle to clear excess clay but not enough to make a huge hole or it will be difficult to control the X in the finished project.

Line up the X's on your wax paper coated baking sheet as you finish each one or just toss the silicone mat right on the cookie sheet.