Instructables
Gaze in awe mere mortals, at my Creepy UV Sun Jar!  This new twist on an old idea is awesome, eye catching, and kind of spooky all at the same time. 

I'm the kind of instructabler who makes a lot of sun jars, as well as other solar powered LED devices.  I've built several of these with UV LEDs in them, as I like the weird purplish glow, but they're very dim.  Now with the simple addition of some glow in the dark paint, the full power of the UV LED is revealed!

As with all of my instructables, if you make your own version of this, be sure to post a picture in the comments and I'll send you a digital patch!



 

 
Remove these adsRemove these ads by Signing Up

Step 1: SCIENCE!

If you're not interested in how this works, feel free to skip to the next step.  Stick around if you're awesome and want to learn about ultraviolet radiation, the visible electromagnetic spectrum, and fluorescence.

Human beings can see in a very narrow band of the electromagnetic spectrum, about 750nm (red) to 390nm (violet)--do you remember ROY G. BIV from gradeschool science class?  This is just a tiny chunk of the spectrum, which ranges from radio waves (longest wavelength) at the very bottom all the way up to gamma rays (shortest wavelength) at the very top.  Just below the human visible sprectrum is infrared light, far infrared being heat and near infrared is what people use for active nightvision and remote controls.  Here we're more concerned with the other end of the spectrum, ultraviolet light.  This is the stuff that gives you a tan (or skin cancer) if you get too much of it, though we're working with very safe levels so don't panic. 

An ultraviolet LED will put out most of it's light in the invisible near UV range, with it's major output around 375 nm, just outside of our range, but with a smaller output around 400 nm, or just within range.  For this reason, to the naked eye an UV LED or a blacklight looks pretty dim, but really they're pumping out quite a bit of light that you can't see.  Here's a chart from wikipedia to clarify.

So what good is a bright light that looks dim?  Well,  UV light has an interesting property, in that it causes a number of chemicals to fluoresce.  Fluorescence is when a chemical absorbs light of one spectrum and emits light of a lower spectrum.  In this specific case, the high energy UV photon strikes some glow in the dark paint, causing it to emit a spooky green glow (around 540nm, at a guess).  Thus, spooky sun jar!
1-40 of 67Next »
rollergirls3 years ago
Just wanted to let you know the solar lights are back at my local dollar store so you might check for them at yours. They run out fast but they keep getting more in. I didn't have luck finding the jars though.
depotdevoid (author)  rollergirls3 years ago
Oh, they had 'em! I bought all they had left, thanks for the tip!
depotdevoid (author)  rollergirls3 years ago
Thanks for the heads up, I'll check the dollar tree on the way home!
sunspirit2 years ago
Just wondering, since the solar unit has a 1.4 v power supply, how did you get the 3.5 v uv led to light? It's interesting. Good job on your project.
depotdevoid (author)  sunspirit2 years ago
Thanks sunspirit, and thanks for the patch!

All the voltage change is handled by the electronics that came from the garden light--I've seen "Joule Thief" circuits that step up the voltage from a battery to run an LED, but I didn't build one of my own. The circuit board from the garden light does all that, while charging the battery at the same time!
Thanks depotdevoid. That little piece of infio that circuits step up the voltage completes the circuit in my brain. Now to the workbench. **(:>))
depotdevoid (author)  sunspirit2 years ago
Awesome, I'd love to see the results!
I'll post an image when complete. I am awaiting my final component, the uv led. Thanks again.
Jaime792 years ago
Never mind I didn't see the other post you left with this one...

http://www.dealextreme.com/p/5mm-uv-led-emitters-20-pack-2398

Thank you!!!! I want to make them for my son's spooky themed costume birthday party!!!
Jaime792 years ago
Are you taking about the LED Emitters?
depotdevoid (author)  Jaime792 years ago
Hi Jaime, I'm not sure exactly what you mean, could you be more specific?
When I went on dealextreme.com to find UV LED's the search results showed LED Emitters that look the same as in the picture. 10pk for $1.16 come in blue, green, red. Are those what I'm supposed to get?

sku_1105_1_thumb.jpg
depotdevoid (author)  Jaime792 years ago
Ah, gotcha! Here's the item I buy:

http://www.dealextreme.com/p/5mm-uv-led-emitters-20-pack-2398

I'd love to see some pictures if you build these!
Can these work?

http://www.dealextreme.com/p/14000mcd-25packs-white-5mm-led-1106
depotdevoid (author)  Jaime792 years ago
Oh crud, I just saw they don't sell that anymore! If you want cheap and don't mind waiting, you could also try these ones from futurlec.com:

http://www.futurlec.com/LED/LED5UVULBpr.shtml
mjikidze3 years ago
please tell me what is in the jar at the first picture
depotdevoid (author)  mjikidze3 years ago
What do you mean? The first picture at the very beginning of this instructable?
hoverbored3 years ago
Purely curious - might there be a way to use the same power as the LED to power a miniscule motor or something to cause the tinfoil to move a little, just to create an even more spooky appearance? No need for motor/'animator' to be active at any time other than when the LED is on. Can see where battery may need to be bigger to accomodate power for motion. Nice instructible!!
How about some memory wire - just enough to wiggle it a tad?
http://www.robotbooks.com/Muscle_Wires.htm
depotdevoid (author)  hoverbored3 years ago
Great idea, are you going to make that? I'd love to see pictures!
IETMN3 years ago
this is cool!! Im not a pro member so I can't see all the steps.. would you be kind and send it to my mail please? If so, here it is: stefymel@hotmail.com

Thanks
depotdevoid (author)  IETMN3 years ago
Sorry, the pro memberships are one of the main ways Instructables HQ tries to keep the site going! They're really cheap and absolutely worth it too, and are a great way to support the community here . . .
K.hall863 years ago
really neat! as a college student I re-purposed several "adult beverage" bottles into glow bottles...we filled the bottles with water, fluorescent high-liter ink and/or liquid laundry soap...the liquid soap shines a vivid blue, where as, the yellow high-liter worked the best in giving off a brilliant yellow...I am not sure how the liquid filled jars would work verses the painted jars, but they were really neat!
depotdevoid (author)  K.hall863 years ago
Cool idea! I remember a friend of mine in the dorms had painted his walls with laundry detergent, so the paintings were only visible in black light. Cool ideas, I may have to do something with the highlighter!
we built a shelf that held the bottles near the ceiling, added a dozen or so 18" fish tank lights with UV bulbs...a few months later we had an amazing "man cave" crown molding!
Vectorr3 years ago
Can you post the instructable on the Radio Cat 3000? hehe...
depotdevoid (author)  Vectorr3 years ago
Well, not specifically on how to make one, but here's a video about how to play with a Radio Cat 3000.
jeff-o3 years ago
You can get glow in the dark paint in different colours (www.glowinc.com). This would be extra cool with splashes of red and blue!
depotdevoid (author)  jeff-o3 years ago
Yeah, I've been thinking about trying that for version 2, or just some fluorescent paint. Different colors would be awesome!
Different colours glow for different amounts of time, when powered by the sun. What's great about using a UV light source is that they'll all glow as long as the LED is on! This is a critical difference, and one which I may exploit in future projects....
Marsanni3 years ago
Love the idea. I think i'll make one with a better solar pannel, 4 or 5 LEDS, a photon detector and some capacitors so it charges up during the day and glows at night :)
depotdevoid (author)  Marsanni3 years ago
Sweet, make sure to post some pictures when it's done!
bdaman803 years ago
I made one tonight, but I think I may have used an IR led instead of UV. But it shows up purple when I look at the led in a dark room with a camera. That's UV right?

Great Project thought
UV would make fluorescent stuff fluoresce(like highlighters). Your eyeball fluid is fluorescent, so if you look at a UV source everything gets a bit weird looking. another test is to shine it through money looking for the security strip.
Cameras will pick up both IR and UV rays, thats why they have built in filters, but cameras will still pick those rays up.
depotdevoid (author)  bdaman803 years ago
Purple through a digital camera is an IR LED I'm afraid. Your camera's CCD can see in IR and it translates that to visible light on the screen.

I'm glad you liked the project!
Dou you know of any thin that would make use of IR light? Before I un-solder my IR and find some UV led's.

My daughter likes the one I made with regular spray paint and an un-altered white led lamp
IMG_0211.JPGIMG_0212.JPGIMG_0214.JPG
depotdevoid (author)  bdaman803 years ago
I can't think of anything that would work with IR. The thing is, infrared is lower energy than visible light, and usually (but not always) fluorescence occurs with a higher energy light changing to a lower energy, not the other way around.

Thanks for posting the pictures, your patch is on the way!
talonsblade3 years ago
was just wondering if it would be more effective to make the foil in a cone shape directly under the led, that way the reflective light is directed at the sides, not the top.
depotdevoid (author)  talonsblade3 years ago
Yeah, probably, but you'd have to make sure you got it right or it would all reflect to one side of the jar. I've seen a lot of garden lamps that operate with a little silvered cone at the bottom of the light for just that reason.

Thanks for the comment!
Ryutso3 years ago
I can't actually see the brush you're using, since it's obscured by the paint.

Do you have any other pictures or is it just a really small paint brush?
1-40 of 67Next »