Crown for Kids

Published

Introduction: Crown for Kids

This is a crown for kids.

This crown is made in the environment of autodesk fusion 360.

This crown contains decals , created in the rendering environment of fusion 360.

For decal first I have drawn a 3D model then taken screen shot ,

and then done some editing with the screen shot.

For this crown I have used model and rendering environment of fusion 360.

Step 1:

In first step I am in the model work space of fusion 360.

Then I have drawn a circle by taking the top plane in the model work space.

Step 2:

In this step I am in model work space of fusion 360.

Then I have extruded the circle drawn in the previous step.

Step 3:

In this step I am in the model work space of Fusion 360.

Then I have shelled out the cylinder drawn in previous step.

Step 4:

In this step I am in the model work space of fusion 360.

Then I have taken the front plane and done some sketching to it.

Step 5:

In this step I am in the model work space of Fusion 360.

Then I have extruded the sketch drawn in previous step.

Then I have applied circular pattern operation to the extruded structure.

Step 6:

In this step I am in the model work space of fusion 360.

Then I have taken the top plane and made a circle.

Then I have extruded the sketch drawn.

Then I have applied rectangular pattern to the extruded structure.

Step 7:

In this step I am in the model work space of fusion 360.

Then I have applied the fillets to the structure previously made.

Then I have also applied some colors to the crown.

Step 8:

In this step I am in the model work space of fusion 360.

Then I have applied colors to the horizontal pattern structure.

Then I have applied colors to the vertical pattern structure.

Step 9:

In this step I am in the rendering work space of fusion 360.

Then I have applied decals ,which are created by me, to the crown.

I have applied decals to the horizontal pattern.

I have applied decals to the vertical patterns.

Step 10:

In this step I am in the rendering environment of fusion 360.

Then I have changed physical material of crown from steel to linen.

Step 11:

In this step I am in the rendering environment of fusion 360.

In this step I have provided different views of the crown.

Share

    Recommendations

    • Casting Contest

      Casting Contest
    • Stick It! Contest

      Stick It! Contest
    • Colors of the Rainbow Contest

      Colors of the Rainbow Contest
    user

    We have a be nice policy.
    Please be positive and constructive.

    Tips

    Questions

    Comments