Introduction: Curiously Strong Pocket Tissues

Picture of Curiously Strong Pocket Tissues

This is a pocket sized tissue box that does not get squished in your pocket.

Step 1: Materials

Picture of Materials

All you need is some pocket tissues, scissors, altoids tin, sharpie, dremel, and file or sandpaper.

Step 2: Preparing the Tissues

Picture of Preparing the Tissues

First set the altoids tin on the pocket sized tissues and make a mark at each side with the sharpie. Then make sure the tissues fit in the tin.

Step 3: Prep the Lid

Picture of Prep the Lid

Trace the flap on the disposible tissue box onto the top of the altoids tin. Then file down don't skip this step or you will need an altoids first aid kit.

Step 4: Fill It Up

Picture of Fill It Up

Now take the cut tissues and put them into the modified altoids tin then you're done. Put in your pocket to use. Thanks for looking please vote if you like it.


landongaga (author)2012-03-23

couf... couf...oh thank u yall saved my life.

klaatu777 (author)2011-09-25

It dont look secure.... take 2 paper: 1 for that e 1 for your new cut finger... sorry

Air_Assassin (author)2010-12-30


ERCBIENG (author)2010-06-08

thats a totally new way to use an altiods can! better pictures would be nice

Win Guy (author)2010-04-18

I acually happen to have a kit that has first-aid elements in it! You can see it on my profile page. very good idea, by the way. 4/5!

struckbyanarrow (author)2009-07-31

nice... the tissues probably smell minty...

About This Instructable




Bio: I am a redneck.
More by Redneck2:Cheap homemade car speaker boxCuriously strong pocket tissuesEasy 10 minute duct tape wallet
Add instructable to: