Print PDF
Favorite
Email
Step 2Sizing the cushion liner
The first thing I did was to put my computer in its original sleeve and place it on the foam packing.
I cut the packing approximately the width of the original case, maybe slightly wider. Since I was recycling the foam I did not cut away from the length. In fact if I were to do this again, I would use a longer piece of foam to create a longer flap.
Save any excess you may have. The strip I cut away was used later to pad the sides of the bag.
I cut the packing approximately the width of the original case, maybe slightly wider. Since I was recycling the foam I did not cut away from the length. In fact if I were to do this again, I would use a longer piece of foam to create a longer flap.
Save any excess you may have. The strip I cut away was used later to pad the sides of the bag.
| « Previous Step | Download PDFView All Steps | Next Step » |
 |
Add Comment
|
