With Instructables you can share what you make with the world, and tap into an ever-growing community of creative experts.
I needed a custom small wood box, but the craft store boxes were expensive, poorly hinged, and not quite the size I wanted. Here is an instructable to ...
Here are the tools and materials needed: 3mm Baltic Birch plywood 1/4" square wood strips Power chop saw with 60-80 tooth carbide blade Thin blade razor saw like ...
I needed 5 sided boxes with reinforced corners. All of the inside corners are mitered at 45 degrees. I found that carefully cutting the pieces on my power ...
1. Lay out your box with a strip of blue masking tape holding the top to the sides flat as shown in the photo. The tape acts like ...
I wanted a removable lid so I cut it on the table saw. I set the saw just to cut through the plywood but leave the reinforcements behind ...
After a light sanding to remove any glue and small splinters and knock off sharp edges, it is ready for paint or stain or decoupage! We wanted a ...
Dremel Storage Boxby Boddeeen
Useful Electronics Storage!!by tech-tac
How To Make an Organizer Box for Storing Screwsby darbinorvar
MakerCube: Modular Workbench for Small Spacesby gfc62
My workshopby vonPongrac
Join 2 million + to receive instant inspiration in your inbox.
Download our apps!
© 2015 Autodesk, Inc.
Enter the email associated with your account and we will send you your username and a temporary password.
Not a member? Sign Up »
Already a member? Login »
That's a pro feature!
Want to go pro?
First step is to sign up.
By clicking "Sign me up!" you are indicating that you have read and agree to the Terms of service.
Already a member?" Login »